6�14�- Selecting The Operation Profile; 6�14�1�- Selecting The Screens That Will Be Displayed - Circutor CVM-C11 Instruction Manual

To validate the data, press
Configuration values
Press key
6�14�- SELECTING THE OPERATION PROFILE
The device's operation profile is selected on this screen.
Press key
The key
To validate the data, press
Configuration values
Press key
6�14�1�- SELECTING THE SCREENS THAT WILL BE DISPLAYED
Note: The following screen is displayed if you have selected the
This screen is used to select whether the device's display screens are defined by the user or not.
66
for 3 seconds and the
Table 34:Configuration values: THD calculation�
Possible values
to access the next programming step.
for 3 seconds to edit the value. The
jumps between the possible options.
for 3 seconds and the
Table 35:Configuration values: Operation profile�
Possible values
to access the next programming step.
icon will disappear from the display.
THD calculation
thd Calculation using the effective value (RMS).
THd Calculation using the fundamental value.
icon appears at the top of the screen.
icon will disappear from the display.
Operation profile
AnALY Analyzer profile.
E3 Electrical energy efficiency profile, e
USEr User profile
,
3
profile.
USEr
Instruction Manual
CVM-C11