Table of Contents
Advertisement
CVM-C11
7�5�- MODBUS TCP PROTOCOL: GATEWAY
Note: Screen visible if the Modbus TCP protocol has been programmed,
This screen configures (DHCP not enabled) or displays the gateway for Ethernet communications.
Press the
key to display the value.
Press key
for 3 seconds to edit the value. The
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values. The
To validate the data, press
Press key
to access the next programming step.
7�6�- MODBUS TCP PROTOCOL: MAC ADRESS
Note: Screen visible if the Modbus TCP protocol has been programmed,
This screen displays the MAC address of the device.
Press the
key to display the value.
Note: This parameter cannot be modified.
Press key
to access the next programming step.
Instruction Manual
key repeatedly, increasing the value of the flashing digit.
key jumps to the previous digit.
for 3 seconds and the
"7.1.- PROTOCOL".
icon appears at the top of the screen.
icon will disappear from the display.
"7.1.- PROTOCOL".
to
97
Advertisement
Table of Contents
Need help?
Do you have a question about the CVM-C11 and is the answer not in the manual?
Questions and answers