6�40�- Locking The Programming; 6�40�1�- Password - Circutor CVM-C11 Instruction Manual

Configuration values
Press key
6�40�- LOCKING THE PROGRAMMING
This screen is for protecting the data configured in the programming menu.
Press key
The key
To validate the data, press
Configuration values
Possible values
Press key
6�40�1�- PASSWORD
Note: Screen visible if the programming lock has been activated, Ioc,
MING".
On this screen you enter the password for locking and unlocking the programming.
92
Table 68:Configuration values: BACnet, MAC address�
Minimum value
Maximum value
to access the next programming step.
for 3 seconds to edit the value. The
jumps between the possible options.
for 3 seconds and the
Table 69:Configuration values: Locking the programming�
unIoc When you enter the programming menu you can view and modify the
programming.
Ioc When you enter the programming you can view the programming but not
modify it. Icon
to access the next programming step.
BACnet: MAC address
0
255
icon appears at the top of the screen.
Locking the programming
indicates the locking status.
icon will disappear from the display.
"6.40.- LOCKING THE PROGRAM-
Instruction Manual
CVM-C11