6�37�- Bacnet Protocol: Baud Rate; 6�38�- Bacnet Protocol: Device Id - Circutor CVM-C11 Instruction Manual

6�37�- BACnet PROTOCOL: BAUD RATE
Note: Not available for model CVM-C11-ITF-IN-ETH-ICT2�
Note: Screen visible if the BACnet protocol has been programmed,
PROTOCOL"
The baud rate of BACnet communications is programmed on this screen.
Press key
The key
To validate the data, press
Configuration values
Press key
6�38�- BACnet PROTOCOL: DEVICE ID
Note: Not available for model CVM-C11-ITF-IN-ETH-ICT2�
Note: Screen visible if the BACnet protocol has been programmed,
PROTOCOL"
The device ID is programmed on this screen.
Press key
90
�
for 3 seconds to edit the value. The
jumps between the possible options.
Table 66:Configuration values: BACnet, baud rate�
Possible values
to access the next programming step.
�
for 3 seconds to edit the value. The
for 3 seconds and the
BACnet: Baud rate
9600 bauds
19200 bauds
38400 bauds
"6.31.- RS-485 COMMUNICATIONS:
icon appears at the top of the screen.
icon will disappear from the display.
"6.31.- RS-485 COMMUNICATIONS:
icon appears at the top of the screen.
CVM-C11
Instruction Manual