6�34�- Modbus Protocol: Parity - Circutor CVM-C11 Instruction Manual

When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
To validate the data, press
Configuration values
Press key
6�34�- MODBUS PROTOCOL: PARITY
Note: Screen visible if the Modbus protocol has been programmed,
PROTOCOL"
The type of parity of Modbus communications is selected on this screen.
Press key
The key
To validate the data, press
Configuration values
Press key
88
Table 63:Configuration values: Peripheral number�
Minimum value
Maximum value
to access the next programming step.
�
for 3 seconds to edit the value. The
jumps between the possible options.
Table 64:Configuration values: Modbus, Parity�
Possible values
to access the next programming step.
for 3 seconds and the
Peripheral number
for 3 seconds and the
Modbus: Parity
no no parity
EvEn even parity.
odd odd parity.
icon will disappear from the display.
1
255
"6.31.- RS-485 COMMUNICATIONS:
icon appears at the top of the screen.
icon will disappear from the display.
CVM-C11
to
Instruction Manual