Removing The Controller And Sensor Head Connection Cable - Panasonic HG-S Series User Manual

3.4 Connecting the Controller and Sensor Head
● Insert the connector firmly. Risk of sensor head or controller damage if not completely
connected.

3.4.7 Removing the Controller and Sensor Head Connection Cable

Grasp the controller, and while pressing on the lock release lever on the controller connector of
the sensor head connection cable, pull toward you to disconnect.
● If you attempt to disconnect the cable by pulling it without pressing the lock release lever,
cable wire breakage and connector damage may occur.
3-12 WUME-HGS-11