Panasonic HG-S Series User Manual page 101

Timing chart
1. When the power is turned ON, the indeterminate state is held until the external trigger
input turns ON.
2. When the external trigger input turns ON (rising edge), the judgment value (JUDGE.V) is
held.
3. If the reset input turns ON, the indeterminate state is held.
4. Judgment output outputs the judgment result based on the output setting.
* When the calculation function is used, calculation value "CALC" is shown instead of normal
measured value (NORM.V).
■
Setting item
Setting item
Measurement mode
(MEAS)
Setting item
Trigger mode (TRG)
WUME-HGS-11
Set values
Sample hold (S-H)
Peak hold (P-H)
Bottom hold (B-H)
Peak to peak hold (P-P)
Peak to peak hold / 2 (P-P/2)
NG hold (NG-H)
Self sample hold (SLF.S-H)
Self peak hold (SLF.P-H)
Self bottom hold (SLF.B-H)
Set values
Hold (HOLD)
One-shot (1SHOT)
5.3 Advanced Settings ( )
Default value
S-H
Default value
HOLD
5-29