Panasonic HG-S Series User Manual page 149

Setting item
Application (APPLI)
■
Maximum Value (
This application determines the largest measured value of the master unit and slave units.
Measured value of "slave unit 2" is maximum value and becomes calculated value of master
unit.
● None of the connected slave units output the judgment result. (Always OFF)
● All sensor head indicators show the calculation result of the master unit.
● The response time for judgment output is the response time setting on the master unit and
slave units plus 3 ms.
● The judgment value (JUDGE.V) (calculation result) appears on the digital display / MAIN
(white) of the master unit.
The normal measured value (NORM.V) appears on the digital display / MAIN (white) of each
slave unit.
■
Minimum Value (
This application determines the smallest measured value of the master unit and slave units.
Measured value of "slave unit 1" is minimum value and is taken as calculated value of master
unit.
WUME-HGS-11
5.4 Calculation Settings (
Maximum value (MAX)
Minimum value (MIN)
Flatness (FLAT)
Average value (AVERAG)
Standard difference (STAND)
Torsion (TORSIN)
Curvature (CURVEA)
Thickness (THICK)
)
)
Set values
) (Master Unit Only)
Default value
MAX
5-77