Sensor Head (Regular Type) - Panasonic HG-S Series User Manual

Name
10 DOWN key
11 ENTER key
12 EXIT key
13 Status mark
14 Copy checkmark (Orange)
15 Input indicator (White)
16 Preset indicator (Green)
17 Preset key

2.2.2 Sensor head (Regular type)

1 Sensor head connection cable connector Connects the sensor head connection cable.
2 Fastener
3 Spindle
WUME-HGS-11
● Use to change setting items when configuring settings, and to change
numeric set values.
● Long-press for 2 seconds in the base screen to enter bank mode.
● Short-press in the base screen to finely adjust the LOW set value.
● Use to select setting items and finalize settings when configuring
settings.
● Long-press for 3 seconds together with the EXIT key in the base screen
to activate or cancel key lock.
● Use to exit a setting item or cancel a setting when configuring settings.
● Long-press for 3 seconds together with the ENTER key in the base
screen to activate or cancel key lock.
Lights up while the trigger input (external input) is ON.
TRIG
(White)
Lights up during sampling when self-hold is set.
HOLD
Lights up while the judgment value is held.
(White)
CALC
Lights up when set to calculation mode with a slave unit connected.
(White)
When configuring master unit settings, "COPY" lights up for setting items
that can be copied to slave units. A checkmark lights up for items selected
for copying, and the settings are copied when copying is executed.
Lights up when external input 1, 2, or 3 is ON.
Lights up when the preset function is used.
When short-pressed in the base screen, the preset function turns ON.
When long-pressed for 2 seconds in the base screen, the preset function
turns OFF.
Name
Function
Fastens the sensor head using the provided nut.
Detects the amount of movement.
2.2 Description of Parts
Function
2-5