Panasonic HG-S Series User Manual page 20

2.2 Description of Parts
Name
Digital display / operation
5
cover
■
Digital display / operation unit
Name
Output 1 indicator (Orange)
1 Output 2 indicator (Orange)
Output 3 indicator (Orange)
Circle meter (Orange,
2
Green)
3 Digital display / SUB (Green) Shows the setting item. The item set using display switching mode appears.
Digital display / MAIN
4
(White)
Guide mark / arrow key
5
(White)
6 Guide mark / ENT (White)
7 LEFT key
8 UP key
9 RIGHT key
2-4
Keep closed when not using.
Lights up when output 1 is ON.
Lights up when output 2 is ON.
Lights up when output 3 is ON.
● Shows increases / decreases of the judgment value by meter display.
● The lowest two gradations show the LOW judgment, and the highest two
gradations show the HIGH judgment.
● Green lights up when the judgment is GO. Orange lights up when the
judgment is LOW / HIGH.
● When the HIGH setting is set to a lower value than the LOW setting, all
indicators turn OFF.
● To show the count, long-press the LEFT / RIGHT / UP / DOWN key for 2
seconds in the base screen.
● The number of setting items in the level lights up, and the order of the
setting times is shown by blinking.
Shows the judgment value and setting data.
Lights up when the LEFT / RIGHT / UP / DOWN key is enabled while
configuring settings.
Lights up when the ENTER key is enabled while configuring settings.
● Use to change setting items and settings when configuring settings, and
to move through set value digits.
● Long-press for 2 seconds in the base screen to enter teaching mode.
● Use to change setting items when configuring settings, and to change
numeric set values.
● Long-press for 2 seconds in the base screen to enter display switching
mode.
● Short-press in the base screen to finely adjust the HIGH set value.
● Use to change setting items and settings when configuring settings, and
to move through set value digits.
● Long-press for 2 seconds in the base screen to enter setting mode.
Function
Function
WUME-HGS-11