Preset Save - Panasonic HG-S Series User Manual

■
Setting method
Setting item
Preset data selection (PR.OBJ)

5.2.8 Preset Save (

You can write preset information to EEPROM by setting preset save to ON.
The preset value is saved even when the power is turned OFF.
When the power is turned ON, the controller loads the preset ON / OFF state and offset value
last saved to EEPROM.
● Data can be saved to EEPROM about 1 million times. If you do not need to save the preset
value, set preset save to OFF.
● If you set preset values by key operation, the preset values are saved in internal memory and
retained even after the power is turned OFF.
● To set preset values by external input, set external input to preset input.
● For preset input by external input, refer to
WUME-HGS-11
Set values
Normal measured value (NORM.V)
Judgment value (JUDGE.V)
)
"5.3.3 External Input (
5.2 Basic Settings (
Default value
NORM.V
)".
)
5-19