Panasonic HG-S Series User Manual page 171

Contact-type digital displacement sensor
Hide thumbs Also See for HG-S Series:
Table of Contents

Advertisement

Type
NPN
output
Model
No.
PNP
output
Trigger input
Preset input
Reset input
Bank input A / B
External input
switching
Response time
Output 1 indicator
Output 2 indicator
Output 3 indicator
Input indicator
Preset indicator
Display
Display resolution
Display range
Protective structure
Contamination level
Ambient temperature
Ambient humidity
Elevation
Insulation resistance
Withstand voltage
Vibration resistance
WUME-HGS-11
Master unit
High-performance type
HG-SC101
HG-SC101-P
PNP output type
Non-contact input or PNP open-collector transistor
● Input condition:
Invalid (0 to +0.6 V DC or open)
Valid (+4 V to +V DC)
● Input impedance: Approx. 10 kΩ
Input time 2 ms or more (ON)
Input time 20 ms or more (ON)
Input time 20 ms or more (ON)
Input time 20 ms or more (ON)
Input 1 / Input 2 / Input 3 can be changed to "Preset / Reset /
Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset,
Trigger)"
3 ms, 5 ms, 10 ms, 100 ms, 500 ms, 1,000 ms switching type
Orange LED (lights up when output 1 is ON)
Orange LED (lights up when output 2 is ON)
Orange LED (lights up when output 3 is ON)
Green LED (lights up when preset is used)
Circle meter: Orange / Green LCD, Copy checkmark: Orange LCD
Digital display / MAIN: White LCD, Digital display / SUB: Green LCD
Guide mark / arrow key: White LCD, Guide mark / ENT: White LCD
Status mark / TRIG: White LCD, Status mark / HOLD: White LCD
Status mark / CALC: White LCD
-10 to +50 °C (No dew condensation or icing allowed)
20 MΩ or higher, using 250 V DC megger connected between all supply terminals and
1,000 V AC for one minute between all supply terminals and case
10 to 150 Hz with 0.75 mm amplitude, maximum acceleration 49 m/s
Standard type
HG-SC111
HG-SC111-P
White LED (lights up when input is ON)
0.1μm
-199.9999 to 199.9999 mm
IP40 (IEC)
2
35 to 85% RH, Storage: 35 to 85% RH
2,000 m or lower
case
directions for two hours each
6.1 SPECIFICATIONS
Slave unit
Wire-saving type
HG-SC112
HG-SC113
HG-SC112-P
(Note 3)
, Storage: -20 to +60 °C
(Note 4)
2
in X, Y and Z
6-3

Advertisement

Table of Contents
loading

Table of Contents