Panasonic HG-S Series User Manual page 164

5.7 Calibration Settings (
3. Enter the target value by using the LEFT / RIGHT key ( / ) to move through digits and
the UP / DOWN key ( / ) to change values.
User settings (USER)
4. Press the ENTER key.
When the zero point measured value and target point measured value have been correctly
acquired, "GOOD" appears and calibration is executed.
5. After one second elapses, the display will automatically return to the base screen.
5-92
)
Setting item
Adjustment value 2
(AJ.VAL2)
Set values
-199.9999 to 199.9999 (mm)
Default value
10.0000
WUME-HGS-11