Analog Scaling - Panasonic HG-S Series User Manual

■
Setting method
Setting item
Number of digits displayed (DIGIT)
■
Reference:
● Changes to the number of digits displayed setting apply only to the display of normal measured
values (NORM.V), LOW set value, HIGH set value, sensor head measured values, calculated
values, and judgment values (JUDGE.V).
● Changes to the number of digits displayed setting do not affect judgment output.

5.3.6 Analog Scaling (

The judgment value (JUDGE.V) can be converted to a current (4 to 20mA) and output as
analog output.
Analog scaling allows you to select the method of setting the scaling upper limit value and
scaling lower limit value for analog output.

Analog scaling

Default (DEFALT)
Free (FREE)
WUME-HGS-11
4 digits (0.0001)
3 digits (0.001)
2 digits (0.01)
1 digit (0.1)
)
Output an analog current according to the maximum stroke of the sensor head.
You can set the upper limit value and lower limit value of analog output.
5.3 Advanced Settings (
Set values
Function
)
Default value
0.0001
5-59