Panasonic HG-S Series User Manual page 66

4.2 Explanation of Modes
HIGH set value, LOW set value
HIGH set value, LOW set value, preset value
● Setting items saved to and loaded from banks can be changed in setting mode.
For the setting procedure, refer to
● Set values saved to and loaded from banks are saved in internal memory and retained even
after the power is turned OFF.
● The usage count is about 1 million.
■
How to Save and Load Settings to / from a Bank
As shown below, there are two methods for saving and loading settings to / from a bank.
Method
Key operation
External input
Saving and Loading by Operation Key
1.
Long-press the DOWN key for 2 seconds. (The number of lit increments in the circle meter
increases.)
2.
"SAVE" appears in the digital display / SUB (green).
3.
Press the LEFT / RIGHT key to switch between "SAVE" and "LOAD".
4.
Press the DOWN key. "BANK1" appears in the digital display / SUB (green), and "YES"
appears in the digital display / MAIN (white).
4-18
Setting item
"5.6 Bank Settings (
Factory default state
Default state
)".
Description
Save to bank
Load from bank
Load from bank
-
WUME-HGS-11