Panasonic HG-S Series User Manual page 172

6.1 SPECIFICATIONS
Type
NPN
output
Model
No.
PNP
output
Shock resistance
Material
Cable
Weight (main unit
only)
Standards
(Note 1) Current consumption does not include analog current output.
(Note 2) Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values.
(Note 3) When slave units are connected to the master unit, the maximum sink current / source current of the
control output and ambient temperature vary depending on the number of connected slave units as
shown below.
Number of connected slave units
When
communication
unit not
consolidated
1 to 7 units
8 to 15 units
(Note 4) Do not use or store in an environment that has been pressurized to an air pressure higher than the
atmospheric pressure at 0 m.
Sensor head (Regular type)
Type
Model No.
Position detection
method
Measurement range
Stroke
6-4
Master unit
High-performance type
HG-SC101
HG-SC101-P
2
98 m/s (approx. 10 G) in X, Y and Z directions 5 times each
Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal
2
0.2 mm 2-
conductor (brown
0.15 mm
and blue lead
conductor 2 m
2
wires) / 0.15 mm 7-
composite cable
conductor 2 m
composite cable
Approx. 140 g
When
communication
unit consolidated
1 to 6 units
7 to 14 units
10 mm type
General purpose
Low
Standard measuring
force
HG-S1010 HG-S1010R
10.5mm or more
Standard type
HG-SC111
HG-SC111-P
2
7- 0.15 mm
conductor 2 m
composite cable
Approx. 140 g Approx. 130 g
EMC Directive/EMC Regulations
Maximum sink current /
source current of control
output
20mA
10mA
High precision
Standard measuring
HG-S1110 HG-S1110R
Optical absolute linear encoder method
10mm
Slave unit
Wire-saving type
HG-SC112
HG-SC113
HG-SC112-P
2
6-
Approx. 60 g
Ambient temperature
-10 to +45 °C
32 mm type 50 mm type
General purpose
Low
Standard
force
HG-S1032
32mm
32.5mm or
more
WUME-HGS-11
―
HG-
(Note
S1050
6)
50mm
50.5mm or
more