Panasonic HG-S Series User Manual page 12

1.2 Safety Information
● If the Low measuring force type (HG-S1010R/HG-S1110R) is mounted in a lateral position
and used with a roller-type probe (HG-SS40U, optional), the joint (optional) cannot be used.
Usage environment
● This product is suitable for indoor use only.
● Avoid dust, dirt, and steam.
● Do not use this sensor in places where it may come in contact with corrosive gas, etc.
● Ensure that the product does not come into contact with organic solvents such as thinner.
● Ensure that the product does not come into contact with strong acid or alkaline.
● Ensure that the product does not come into contact with oil or grease.
● This product cannot be used in an environment containing flammable or explosive gases.
● Performance may not be satisfactory in a strong electromagnetic field.
● This product is a precision device. Do not drop or otherwise subject to shock. Risk of
product damage.
● Ensure that strong horizontal force is not applied to the spindle. This may cause loss of
accuracy and decreased durability.
Handling (Regular type)
● Never remove the standard rubber bellows except for replacement. Risk of product damage
due to infiltration by dust, water, or other contaminants.
● The standard rubber bellows is a consumable part. Replace it regularly as a preventive
maintenance.The rubber bellows can deteriorate quickly depending on usage environment.
If it deteriorates, it generates cracks and other problems,causing dust and water to enter
and resulting in a malfunction.
Handling (Air-driven type)
● Mount a pressure-reducing valve to use the product within the allowable working pressure
range. Excessive pressure may result in failure or damage.
● Do not use air containing dust, water, oil, or other foreign matter. Doing so may result in
electric shock or failure. To prevent such problems, take appropriate measures such as
installing air filters or mist separators.
● When performing maintenance, inspection, or cleaning, make sure to completely shut off
the air supply to ensure that the pressure in the product and piping has been reduced to
zero. Air pressure may cause an accident or product damage.
Other matters
● Never attempt to disassemble, repair, or modify the product.
● When the product becomes unusable or unneeded, dispose of the product appropriately as
industrial waste.
1-4 WUME-HGS-11