Eco Mode ( ) - Panasonic HG-S Series User Manual

Contact-type digital displacement sensor
Hide thumbs Also See for HG-S Series:
Table of Contents

Advertisement

5.3 Advanced Settings (
Scaling lower limit value setting
Setting item
Scaling lower limit value (ANA.LO)
5.3.8 Eco Mode (
You can save power by having the backlight of the controller display turn OFF when idle.
When Eco mode is set to ON, the display backlight turns off 30 seconds after the last key
operation is performed.
When OFF, the backlight is turned ON by pressing any key.
● If an error occurs when the backlight is OFF, the backlight turns ON.
● The backlight does not turn OFF while an error is displayed.
5-64
)
-199.9999 to 199.9999 (mm)
)
Setting range
Default value
0.0000
WUME-HGS-11

Advertisement

Table of Contents
loading

Table of Contents