Panasonic HG-S Series User Manual page 106

5.3 Advanced Settings (
Timing chart
1. Based on the peak to peak / 2 setting (peak value to bottom value), the judgment value
(JUDGE.V) is gradually updated from 0.
2. The judgment value (JUDGE.V) is held while the external trigger input is ON.
3. If the reset input turns ON while the external trigger input is OFF, an indeterminate state
occurs during the response time. All outputs remain OFF during an indeterminate state.
4. After the response time elapses, the indeterminate state is released.
5. If the reset input turns ON while the external trigger input is ON, the indeterminate state is
held until the external trigger input turns OFF.
6. Judgment output outputs the judgment result based on the output setting.
* When the calculation function is used, calculation value "CALC" is shown instead of normal
measured value (NORM.V).
■
Peak Hold (Trigger mode: One-shot)
When the external trigger input is ON, the peak value during the sampling interval (external
trigger input OFF interval) is held as the judgment value (JUDGE.V).
When the external trigger input turns OFF, the next sampling interval starts.
5-34
)
WUME-HGS-11