3.6 Connection Diagrams and I/O Circuit Diagrams
3.6.1 Connection Diagrams
■
HG-SC101、HG-SC101-P
(Note 1)
Connect a shielded wire (analog ground) to the ground (0 V) of the analog input device.
■
HG-SC111、HG-SC111-P
(Note 1)
Connect a shielded wire (analog ground) to the ground (0 V) of the analog input device.
● The HG-SC111 and HG-SC111-P cables do not have +V or 0 V. Power is supplied from the
connector of the master unit.
WUME-HGS-11
3.6 Connection Diagrams and I/O Circuit Diagrams
3-17