3.2 Attaching the Sensor Head
■
Sensor head accessories
Sensor head fastening wrench
10 mm type, air-driven type
32 mm/50 mm type
Mounting nut
1.
Open a hole in the housing in which the sensor head will be mounted.
HG-S1010(R), HG-S1110(R)
HG-S1010-AC、HG-S1110-AC
HG-S1032
HG-S1050
2.
Insert the sensor head into the hole you opened in the housing, and fasten provisionally
with the provided mounting nut.
The mounting direction of the mounting nut differs according to the thickness of the
housing. For the mounting direction, see the table below.
WUME-HGS-11
3.2 Attaching the Sensor Head
Mounting hole
Housing thickness
6.5 to 12.5 mm
6.5 to 10.5 mm
6.5 to 12.5 mm
3-3