Panasonic HG-S Series User Manual page 144

5.3 Advanced Settings (
■
Setting method
Setting item
Catch check (CAT.CHK)
● If the sensor head is reconnected with the value set to ON, the ON state will be maintained,
regardless of the sensor head type (regular or air-driven).
● If different sensor head types are reconnected, the contents of catch check (whether to check
spindle elongation or contraction) will be changed according to the sensor head.
■
Number of Connected Controllers Check (Master Unit Only)
This function checks the number of controllers that are connected, and outputs an error if the
number has changed.
An error occurs if the number of controllers increases or decreases as compared to the number
of connected controllers at the time the check function was turned ON.
If you need to change the number of connected controllers, turn OFF the number of connected
controllers check function, change the number of controllers, and then turn the check function
back ON.
5-72
)
Set values
Check OFF (OFF)
Check ON (ON)
Default value
OFF
WUME-HGS-11