Removal Method - Panasonic HG-S Series User Manual

3.5 Connecting Controllers
6.
Tighten the screws to fasten the end plates.
The tightening torque should be 0.3 N•m or less.
● Take care if the screw is tightened with a torque of 0.3 N•m or more, this product may
get damaged.

3.5.2 Removal Method

1.
Loosen the screws on the end plates.
2.
Remove the end plates.
3.
Slide and remove the controllers, one at a time.
3-16 WUME-HGS-11