Panasonic HG-S Series User Manual page 46

3.6 Connection Diagrams and I/O Circuit Diagrams
■
HG-SC112 / NPN output type
*S1
Non-voltage contact or NPN open collector transistor
0 to +1.2 V DC: Valid
+8 V to +V DC or open: Invalid
(Note 1) Use shielded wire for the analog output.
● All outlets are equipped with short-circuit protection. If any one of outputs 1 to 3 short-circuits,
all outputs temporarily turn OFF. The outputs automatically recover when the short-circuit state
is cleared.
● The HG-SC112 cable does not have +V or 0 V. Power is supplied from the connector of the
master unit.
3-22
or
WUME-HGS-11