Panasonic HG-S Series User Manual page 57

● To set preset values, refer to
● To set preset values by external input, set external input to preset input.
● For preset input by external input, refer to
● If you set preset values by key operation, the preset values are saved in internal memory and
retained even after the power is turned OFF.
● The usage count is about 1 million.
● If one of the messages in the table below appears in the digital display, the preset has not been
executed correctly and an error has occurred.
MAIN (white) / SUB
(green)
MAIN (white)
SUB (green)
MAIN (white)
MAIN (white)
SUB (green)
Preset release
1.
To cancel the preset function, long-press the preset key for 2 seconds.
WUME-HGS-11
"5.2.6 Preset Value (
Digital display
Display
4.2 Explanation of Modes
)".
"5.3.3 External Input (
Immediately after the power is turned ON or a
reset is input
When the upper or lower display limit is exceeded
During alarm output
When an error is output
)".
Description
4-9