Panasonic HG-S Series User Manual page 62

4.2 Explanation of Modes
● The higher judgment value is set as the HIGH set value and the lower judgment value is set as
the LOW set value, regardless of the order of steps
3-point Teaching
1.
Long-press the LEFT key for 2 seconds. (The number of lit increments in the circle meter
increases.)
2.
"SET.1" appears in the digital display / SUB (green), and the digital display / MAIN (white)
blinks.
3.
Measure the HIGH-side defective workpiece, and press the ENTER key.
4-14
"Step 3" and "Step 4".
WUME-HGS-11