Optional Cable Connection Method - Panasonic HL-G2 Series User Manual

3.4 Optional Cable Connection Method

● When using the optional cable, confirm that there is no foreign matters in the connector
part before using the cable.
● Always grasp the connector body when connecting or disconnecting the connector. Wires
may break if excessive stress is applied to the cable.
● Insert the connector all the way in and tighten the M2.6 screws to this product before
using it. If the connectors are not completely connected, the sensor unit may become
damaged.
● Do not insert the connector at an angle. Otherwise, connector pins may be bent.
1.
Insert the sensor unit connection connector on the optional cable into the sensor unit cable
connector.
When doing this, insert the protrusions on the sensor unit connector on the communication
cable into the holes on the connector for the sensor unit connection cable.
2.
Tighten the two M2.6 screw. Tighten the two M2.6 screw. (Tightening toque 0.23 to 0.3
N·m)
3.
When removing the connecting cable from the sensor, loosen the two M2.6 screws, hold
the connector part of the cable, and pull out the cable.
WUME-HLG2AN-2

3.4 Optional Cable Connection Method

3-7