Panasonic HG-S Series User Manual page 45

■
HG-SC111-P / PNP output type
*S1
Non-voltage contact or PNP open collector transistor
+4 V to +V DC: Valid
0 to +0.6 V DC or open: Invalid
(Note 1) Use shielded wire for the analog output.
● All outlets are equipped with short-circuit protection. If any one of outputs 1 to 3 short-circuits,
all outputs temporarily turn OFF. The outputs automatically recover when the short-circuit state
is cleared.
● The HG-SC111-P cable does not have +V or 0 V. Power is supplied from the connector of the
master unit.
WUME-HGS-11
3.6 Connection Diagrams and I/O Circuit Diagrams
or
3-21