Panasonic HG-S Series User Manual page 29

HG-S1010(R), HG-S1110(R)
HG-S1010-AC、HG-S1110-AC
HG-S1032
HG-S1050
● When tightening the mounting nut on the regular type, take care not to damage the rubber
bellows.
4.
On the regular type, make sure that the rubber bellows have not become deformed as
shown below.
If the rubber bellows is deformed, restore the normal shape by rotating the bellows or
otherwise.
● If the rubber bellows is deformed, a load will occur when the spindle operates and
damage may result.
WUME-HGS-11
3.2 Attaching the Sensor Head
Tightening torque
12.5 N⋅m
15 N⋅m
3-5