Tilting And Handling; Sharp Edges; Electric Hazards - ABB Terra DC Wallbox Installation Manual

• Prepare the site where the charge station will be installed according to the requirements described in
this guide.
• Ensure there is sufficient space around the charger to carry out maintenance work.
• Appoint a person responsible for the safe operation of the charge station and for the coordination of all
work.
The owner is cautioned that changes or modifications not expressly approved by ABB could void the owner's
authority to operate the equipment and ABB's warranty policy.
Neither ABB nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,
costs or expenses incurred by purchaser or third parties as a result of: an accident, misuse or abuse of this product
or unauthorized modifications, repairs or alterations to this product, or failure to strictly comply with ABB's
operating and maintenance instructions.
1.4.2

Tilting and handling

1.4.3

Sharp edges

1.4.4

Electric hazards

2 0 2 0- 0 8- 0 6
WARNING
Heavy equipment
The Terra DC Wallbox weighs approximately 70 kg. Follow the handling
Instructions:
1. Two people are recommended for the installation and wall-mounting of
a Terra DC Wallbox.
2. Do not drop the Terra DC Wallbox.
WARNING
Sharp metal edges
There could be sharp metal edges inside the Terra DC Wallbox. It is
recommended to wear mash protecting gloves when working inside the
charger.
DANGER
Hazardous voltage
The Terra DC Wallbox contains conductors under hazardous electrical
voltages. The grid terminals on the internal DIN rail may carry hazardous
voltages, even if all circuit breakers are switched off.
TER R A DC WAL LB OX
8 / 4 1