Creating a drive project
This chapter explains how to create a new drive project. You set up a sample project using
the STARTER commissioning tool. You then transfer the sample project to the Control Unit
of the real drive over a communications interface.
PROFIBUS has been selected as the data exchange system between the programming
device (PG/PC) and the Control Unit (CU).
3.1
Setting the communications interface
1. Double-click on the icon to launch the STARTER commissioning tool:
The main window of the STARTER application is displayed.
2. Click on menu command Options > Set PG/PC Interface.
The "Set PG/PC Interface" window opens:
Getting Started
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
All manuals and user guides at all-guides.com
3
15