Confirm Systems - Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist

Verifying Operation

Confirm Systems

Creating a Service Directory
To create a subdirectory:
1. Select Options > Add Archive Location.
2. Select MICService in the Category field.
3. Enter Service <current date> in the Sub-category field.
4. Click
OK.
Creating a Sample File for confirm systems
These instructions are for confirm systems only. For Standard systems, refer to
"Creating a Sample File for Standard Systems" on page 83
A Developer user profile is required to create a sample information file.
When instructed to create a sample information file, follow these steps:
1. Select File > New > Sample Information; the Create a Sample Information File dialog
containing the available templates is displayed.
2. Select the C:\5205\Service directory from the Directories list.
3. Choose the Saturn DigiSizer Garnet Reference Material template.
This copies the analysis conditions from the template in the C:\5205\Service directory
into your sample file so you do not have to enter the analysis conditions individually.
4. Click Create;
5. Enter a sample file identifier in the Sample field.
Sample file identifiers can contain up to 42 characters.
6. Enter your name in the Operator field.
7. Enter the instrument serial number in the Submitter field.
8. Click Save:
9. Save the sample file in the Service <current date> directory, then click
10. Select
Close
the dialog.
86
the Sample Information dialog is displayed.
the Save As Sample Information dialog is displayed.
. A confirmation message is displayed. Select Yes to save the file and close
Saturn DigiSizer II 5205
Save.
Jul 09