Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 89

Saturn DigiSizer II 5205
3. When the file is copied in the Service directory, it is Read-Only. To remove the Read-
Only attribute, select the file from the Microsoft Explorer, right click to display the
shortcut menu, select Properties, and click the Read-Only box to remove the check mark
and the attribute.
Creating a Sample File for Standard Systems
These instructions are for Standard systems only.
When instructed to create a sample information file, follow these steps:
1. Select File > Open > Sample Information File.
2. Enter a sample file name in the File name field and in the Installation Checklist.
Sample file names can contain up to 8 characters and the extension.SMP.
3. Select OK.
Jul 09
A confirmation dialog is displayed.
Verifying Operation
83