Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 70

Installing the Analysis Program
5. Designate "password" as a temporary password that the user can enter to access the
application in the Password field for all users. This password is not saved in the password
history file. When the user enters this password, he will be prompted to change it. The
password to which he changes it will then be stored in the password history file.
The password must contain a minimum of six alphanumeric characters.
When you enter a password here, the user's Windows password is not changed.
6. Select the user's application access level by clicking the appropriate button. The user
access level can be one of the following:
• Administrator and Developer
• Developer only
• Analyst only
7. The Password change date field is blank and disabled because this is a new user.
8. The Change password on next logon box is checked because the user's assigned
password is temporary and must be changed when the user logs onto the application.
9. Click OK
Setting Up a Service User Account
A user account should be set up during installation to provide Micromeritics service personnel
access to system functions if a service call is required.
To set up a service account:
1. Click the Users tab to display the User dialog.
64
to save the user information and close the Add User dialog.
Saturn DigiSizer II 5205
Jul 09