Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 109

Saturn DigiSizer II 5205
31. Click Next
32. Ensure that the CD-ROM drive is shown as the source location; if not, click
select the correct drive.
33. Click Finish
dialogs.
34. Turn both units on and start the analysis program.
Installing Existing Configured Analyzers to a New Computer
Use the instructions in this section to install two existing configured, analyzers on a different
computer (perhaps a newly purchased one) that does not have the analysis program installed.
1. Install the analysis program on the new computer. When prompted for the number of
analyzers you plan to install, specify the actual number you are installing.
2. Use Windows Explorer to edit the application file (either WIN5205.ini for standard
software or cfr5205.ini for confirm software):
a. Right-click on the Start button and select Explore.
b. Open the directory where the analysis program is installed (the default is either
C:\5205 for standard software or C:\cfr5205 for confirm software).
c. Double-click on cfr5205.ini or WIN5205.ini. This opens Notepad, displaying the ini
file.
d. Navigate (or page-down) to the section titled [Unit 1].
e. Confirm that there is a TCPAddr= entry and that it matches the address recorded on
the Saturn DigiSizer Configuration form for this unit. If the entry is not there, add it
in the following format:
where n's are replaced with the IP address recorded on the Saturn DigiSizer
Configuration form.
If the TCPAddr= entry is different from the one recorded on the Saturn DigiSizer
Configuration form, enter the correct one.
f. Navigate to the section titled [Unit 2] and repeat Step e.
g. Select File, Save to save the changes and close Notepad.
3. Disconnect the ethernet cable from the old computer and connect it to the new one.
4. Turn on installed analyzers and start the analysis program.
Jul 09
; the Calibration File installation dialog is displayed.
to install the calibration files; follow the instructions displayed in the
TCPaddr=[nnn.nnn.nnn.nnn]
Appendix A
Browse to
5
A-