Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 60

Installing the Analysis Program
15. Click Next
16. In the Step 1 group box, click the radio button for the number of analyzers to be attached
to this computer.In the Step 2 group box, enter the serial number(s) for the analyzer(s)
you are attaching to this computer.
If...
you are installing the
analysis program at
initial installation:
you are reinstalling
the analysis program
on a new computer:
you plan to use the
analysis program for
offline data
reduction:
you are moving an
analyzer from
another computer to
this one:
Additional hardware is required if you plan to attach two DigiSizers to one computer.
Refer to Appendix A for information on attaching two analyzers.
54
; the Analyzer Configuration dialog is displayed.
Then...
select 1 for the number of analyzers, even when installing two
analyzers. (After installation of the first analyzer, refer to
Appendix A for installing the second one.)
select the actual number of analyzers to be operated with this
computer. (Refer to Appendix A for instructions on
completing installation of two analyzers.)
select 0
select 0
Saturn DigiSizer II 5205
Jul 09