Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 23

Saturn DigiSizer II 5205
10. Slide the liquid sample handler toward the analyzer, guiding the tubing through the ports
on the right side of the analyzer.
Tubing Ports
11. Attach the sample transfer tubing to the sample cell holder as shown below.
Avoid touching the lens when installing the tubing. Dirty, or smudged optics, will
affect analysis results.
12. Attach the RS232 communications cable as follows:
a. Connect one end of the cable to the port labeled RS232 From Saturn Analyzer on the
rear panel of the liquid sample handling unit.
b. Connect the other end of the cable to the port labeled Sample Handling Unit RS232 on
the rear panel of the analyzer.
Jul 09
Setting up the DigiSizer System
Liquid Sample Handler
17