Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 113

Saturn DigiSizer II 5205
19. Click Exit
20. Remove the CD-ROM from the computer and store in a safe place.
21. Use Windows Explorer to edit the application file (either WIN5205.ini for standard
software or cfr5205.ini for confirm software):
a. Right-click on the Start button and select Explore.
b. Open the directory where the analysis program is installed (the default is either
C:\5205 for standard software or C:\cfr5205 for confirm software).
c. Double-click on cfr5205.ini or WIN5205.ini. This opens Notepad, displaying the ini
file.d.Navigate (or page-down) to the section titled [Unit 1].
e. Confirm that there is a TCPAddr= entry and that it matches the address recorded on
the Saturn DigiSizer Configuration form for this unit. If the entry is not there, add it
in the following format:
where n's are replaced with the IP address recorded on the Saturn DigiSizer
Configuration form.
If the TCPAddr= entry is different from the one recorded on the Saturn DigiSizer
Configuration form, enter the correct one.
f. Select File, Save to save the changes and close Notepad.
22. Turn on both analyzers and start the analysis program.
Jul 09
to close the dialog.
TCPaddr=[nnn.nnn.nnn.nnn]
Appendix A
9
A-