Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 54

Installing the Analysis Program
11. Click Next
12. Choose one of the following:
If ....
the port you configured
is listed:
the port you plan to use
has been configured but
is not listed:
13. Click Next
If you selected 0 as the number of instruments to install, calibration files are not
installed.
If you are installing two analyzers, the Calibration File Installation dialog instructing you
how to proceed with installation of calibration files for the second analyzer is displayed.
Read the instructions carefully; they are restated here.
a. Remove this setup CD.
b. Insert the CD containing the files for the analyzer serial number requested.
IMPORTANT: To prevent the CD from AutoPlay, hold down the
close the CD door. Do not release the
48
; the Ethernet Ports dialog is displayed.
Then ....
select the port and proceed to the next step.
Click Specify
Enter the remaining portion of the IP address in the enabled
fields, then proceed to the next step.
; the calibration files are installed.
, the Specify Ethernet Port dialog is displayed.
Shift key until the CD light stops blinking.
Saturn DigiSizer II 5205
key before you
Shift
Jul 09