Installing The Confirm Analysis Program - Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist

Saturn DigiSizer II 5205

Installing the confirm Analysis Program

The installation CD shipped with the analyzer contains the Micromeritics software, which
includes both the Micromeritics application and the Administrator Utility software.
The person who installs the software must have Windows Administrator rights.
To install the software:
1. Turn on the computer.
2. Ensure that the Microsoft Vista Business or Ultimate, or XP Professional operating system
is running.
3. Print a test page to ensure that the proper printer drivers are installed.
4. Insert the program CD into the CD-ROM drive.
5. Select Start from the Status bar, then Run from the Start menu.
6. Enter the name of the drive designator, followed by setup. For example: e:setup.
Alternatively, you can click
setup.exe.
7. Click
OK;
that should be completed before installing the software.
8. If all of the steps have not been completed, click
restart the installation program. Do not proceed with installation until these tasks have
been completed.
Jul 09
Browse
the Ethernet Introduction dialog is displayed. This screen outlines the steps
, navigate to your CD-ROM drive, and select
and perform the steps; then
Cancel
Installing the Analysis Program
51