Entering Windows User Accounts - Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist

Installing the Analysis Program
22. You may be prompted to restart your computer after installation. If so, restart your
computer before running the Micromeritics application.
23. Display the Unit Configuration dialog as follows, and record the date and analyzer
statistics on the Saturn DigiSizer Configuration form located in Appendix B.
a. Select Start > Programs > WIN5205 to start the analysis program.
b. Select Unit [n] > Unit Configuration.
c. Record the unit number (located in the title bar of the dialog).
d. Record the serial number and the IP address (displayed in the configuration group box).
e. Click
IP Setup dialog). Then click
f. Click

Entering Windows User Accounts

The Windows Administrator for the local computer must create user accounts in Microsoft
Windows for all persons who will use the Micromeritics application software. If you need
detailed instructions for performing this procedure, refer to Technical Bulletin Gen034.
56
and record the subnet mask (the series of numbers on the third line of the
Change
Cancel
to close the Unit Configuration dialog.
OK
to close the dialog.
Saturn DigiSizer II 5205
Jul 09