Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 107

Saturn DigiSizer II 5205
16. Enter 2 for the final configuration of this unit (first line)
17. Enter 102 as the new IP address for Unit #2 (fourth field of second line).
18. Record the IP address and subnet mask on the Saturn DigiSizer Configuration form (the
last page of this appendix).
19. Click OK
20. Record the Unit number and serial number on the Saturn DigiSizer Configuration form.
Also record the date, then click
21. Exit the analysis program.
22. Turn Unit #2 off.
23. Reconnect the Ethernet cable of Unit #1 to the Ethernet switch.
24. Insert the analysis program CD into the CD-ROM drive.
25. Select Start from the Task bar, and Run from the Start menu.
26. Enter the drive designator of the CDROM drive, followed by SETUP; for example,
e:setup.
27. Click OK
Jul 09
to close the Unit IP Setup dialog,
OK
; the Setup Welcome dialog is displayed.
.
to close the Unit Configuration dialog.
Appendix A
3
A-