Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 43

Saturn DigiSizer II 5205
Liquid Sample Handler Installation
The following steps are common to both liquid sample handlers.
1. Place the MasterTech to the right of the liquid sample handler.
2. If the liquid sample handler contains liquid:
a. Select Unit[n] > Drain > DigiSizer.
b. Turn off the liquid sampler and the analyzer.
3. Remove the retaining screws on the right side of the liquid sample handler.
4. Loosen the captive thumb screw on the rear panel.
Jul 09
Setting up the DigiSizer System
37