Saturn Digisizer 5205 Confirm Systems; Preparing The Network; Determining File Locations - Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist

Installing the Analysis Program

Saturn DigiSizer 5205 confirm Systems

These instructions apply to confirm systems only.
"Microsoft Windows and Network Administrator"
The customer must provide one or more persons qualified to perform several
complicated tasks using the skills of a Microsoft Windows Administrator and Network
Administrator -- not just someone with Windows Administrator rights.
This person must be on-site during installation.
The following procedures (numbered 1 through 9, with the exception of Step 3. Installing the
Analysis Program) are to be performed by the customer's network, Windows, or confirm
application administrator. (Complete instructions are contained in the Administrator Utility
User's Guide for the Saturn DigiSizer 5205 confirm System.)
The instructions are included here to enable you to assist the customer's administrator if
necessary.

Preparing the Network

If the computer is to be connected to a network, have the customer's Network Administrator
install the computer on the network and set the network rights and permissions.

Determining File Locations

When the Micromeritics software is installed, it creates a default directory on the C drive and
loads the files into this directory unless you select another location. If the customer wishes to
install the files in a different directory, record the location below.
____ Install application in the default directory on C drive.
____ Install application in this directory: ________________________________________
Password folder path:__________________________________________________
Repository folder path:_________________________________________________
Import path:_________________________________________________________
Export path:_________________________________________________________
50
Saturn DigiSizer II 5205
Jul 09