Setting Up The Digisizer System; Installing The Digisizer; Space Requirements; Placing The Digisizer On A Work Surface - Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist

Saturn DigiSizer II 5205

Setting up the DigiSizer System

Installing the DigiSizer

Space Requirements

The Saturn DigiSizer System requires the work space shown below.
You must have access to the front, side, and rear panels for installation of the
instrument.

Placing the DigiSizer on a Work Surface

Ensure that the DigiSizer is placed on the work surface with the back panel facing the front of
the table in order to access the fuse block.
Jul 09
Setting up the DigiSizer System
9