Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 48

Setting up the DigiSizer System
7. Guide the tubing through the hole in the front chassis and connect it to the barbed fitting of
the T-connector.
8. Install the other end of the flexible tubing onto the sample transfer tubing connector on the
side chosen in Step 5 of
Make sure the side to which you connect the flexible tubing coincides with the one
chosen in the arm of the MasterTech.
9. Replace the cover of the liquid sample handler. Replace the retaining screws on the right
side of the unit and retighten the thumb screw on the rear panel.
42
Tubing connected to fitting
"Installing Sample Transfer Tubing" on page 36
Saturn DigiSizer II 5205
.
Jul 09