Micromeritics Saturn II 5205 DigiSizer Installation Instructions And Checklist page 68

Installing the Analysis Program
Entering Password Configuration Parameters
1. Click the Configuration tab to display the Configuration dialog.
2. The Password parameters you enter in this dialog will apply for all Micromeritics software
users.
Enter the number of days in which a user's password will expire in the Expire in field.
This number of days goes into effect any time a user changes his password.
If you enter zero (0) in this field, users' passwords will not expire.
3. Enter the number of days prior to expiration that a user will be notified and asked whether
he wants to change his password in the Warn user in field.
A zero (0) in this field means this function is not used.
4. The Remember field specifies the number of previous passwords to be stored in the
password history file for each user. This file is checked when a user enters a new password
to ensure that the password is unique.
Enter the number of passwords to be stored in the history file in the Remember field.
A zero (0) in this field means this function is not used.
5. Enter the number of times a user will be allowed to enter an invalid password when
attempting to log into the application before the application is locked in the Disable
account after field.
A zero (0) in this field means this function is not used.
6. You may specify that the User ID must match the user's Windows ID and the user must
be logged into the Windows application. This ensures that only the current Windows user
can operate the Micromeritics application. Otherwise, any user with the same access level
(Developer or Analyst) can log into the application.
To specify the matching requirement, click the Must match Windows user box to enter a
check mark.
62
Saturn DigiSizer II 5205
Jul 09