Starting The Printer - Stratasys J5 Series User Manual

Stratasys J5 Series User Guide

Starting the Printer

Caution
l
l
1. Make sure that the main power switch, at the back of the printer, is in the ON
2. Press the power button.
3. When the following screen appears, make sure that the printer door is closed,
DOC-09270 Rev. B
Do not attempt to operate the printer before being trained by an authorized
Stratasys representative.
Observe all safety warnings and follow the safety guidelines described in
Chapter 2.
position.
Figure 4-1 Main power switch and cable
The power button on the front of the printer blinks.
Figure 4-2 Power button
Powering up the printer can take several minutes.
and tap OK.
Figure 4-3 Hardware Initialization screen
4 Operating and Maintaining the Printer
4-3