Mounting An Ex4300 Switch - Juniper EX4300 Series Hardware Manual

8. Perform initial configuration of the switch by following the instructions in
Configuring an EX Series Switch (CLI Procedure)
(J-Web Procedure)
.
9. Set the switch's management options by following the instructions in:
Connect a Device to a Network for Out-of-Band Management
•
Connect a Device to a Management Console Using an RJ-45 Connector
•
• Connect an EX Series Switch to a Management Console Using the Mini-USB Type-B Console Port
SEE ALSO
Rack Requirements
Cabinet Requirements
Clearance Requirements for Airflow and Hardware Maintenance for EX4300 Switches | 135

Mounting an EX4300 Switch

You can mount an EX4300 switch:
• On two posts of a 19-in. rack or a 19-in. cabinet by using the mounting brackets provided with the
switch.
• On four posts of a 19-in. rack or a 19-in. cabinet by using the separately orderable four-post rack-
mount kit.
• In a position recessed 2 in. from the front of a 19-in. rack or a 19-in. cabinet by using the 2-in.-recess
front brackets in the separately orderable four-post rack-mount kit. You can mount the switch in this
recessed position on two-post or four-post racks and cabinets.
• On a wall by using the separately orderable wall-mount kit.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that the switch can
be mounted in any rack or cabinet that provides holes spaced at that distance.
See the Related Documentation for detailed descriptions of the various rack or cabinet mounting
options.
Connecting and Configuring an EX Series Switch
or
Connecting and
171