Juniper EX4300 Series Hardware Manual page 289

Table 81: Chassis Viewer for EX4400 Switches
Field
Fan tray
Table 82: Chassis Viewer for EX4500 Switches
Field Description
Front View
Interface status In the image, the colors listed below denote the interface status:
•
•
•
Mouse over the interface (port) to view more information.
For a Virtual Chassis configuration, select the switch to view the interface status.
If an SFP+ uplink module is installed in the switch, mouse over the interface (ports) on
the module for more information.
For SFP and SFP+ ports, the interfaces appear dimmed if no transceiver is inserted. The
chassis viewer displays
LCD panel LCD panel configured for the LEDs on the ports. Mouse over the icon to view the
current character display.
Console port The console port is used to connect the switch to a management console or to a console
server.
Management (me0) The management port is used to connect the switch to a management device for out-of-
port band management. Use this port for initial switch configuration.
(Continued)
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Transceiver not plugged-in
Description
Mouse over the fan tray icon to display status of the
fans and airflow direction information.
when you mouse over the port icon.
279